The Easiest Ways to Remove Mold from Grout

Posted by on Jul 15, 2016 in Uncategorized |

Lurking in often overlooked corners of our home, just a few feet from reach, mold can just be sitting there for quite some time before getting noticed. It is possible for mold to grow and flourish in one’s home for months before they get detected. Mold grow best in dark and humid places, which means that the kitchen and bathroom are the most likely places where they thrive.

The presence of mold can give the impression to guests that these areas in the household are not well-maintained. Appearances aside, leaving mold to grow untreated is, more importantly, a health hazard. It can cause allergies as well as more severe illnesses such as respiratory ailments. Bathroom grout, which is constantly in contact with moisture is very susceptible.








Keep in mind that excessive use of corrosive cleaning materials will eventually destroy certain caulks and sealants. You may have to replace them in certain areas over time.





Here are four easy to find yet very useful substances that one can use to remove mold from grout:

  • Hydrogen Peroxide

This chemical compound is one of the most efficient materials against mold and is very easy to source. It has anti-viral, antibacterial, and anti-fungal properties. You can use this not just on grout but also to remove mold or prevent it from growing on floors, walls, and even kitchen appliances.

To use: Using a spray bottle, cover with 3% concentration of hydrogen peroxide the surface infested with mold. Leave it on for ten minutes before scrubbing away the mold as well as mold stains. Spray for a second time and wipe away to remove the mold and spores that did not come out the first time.

  • Vinegar

As vinegar is a staple in every kitchen, you can immediately take out mold the moment you see them. Vinegar’s mildly acidic properties make it effective in killing at least 82% of all mold species.

To use: Spray white distilled vinegar on the moody surface, and leave it to sit. Do not dilute the vinegar. After at least an hour, wipe the area clean with water.


  • Bleach

Bleach can be one of the most potent removers of mold, but it should be known that it only cleans surface mold. There’s a good chance that if the mold has penetrated and laid roots deeper into the grout, you will need a different solution to get rid of it for good.

To Use: Purchase a gallon of bleach and an empty spray bottle with trigger from a discount store such as Walmart of Dollar General. Fill the bottle up with bleach, and vigorously douse the contaminated grout with bleach. Make sure that there is plenty of ventilation, as bleach can be harmful to the lungs. Open the doors and windows to the bathroom and turn the vent fan on as well. Simply let the bleach set and dry. You can come back a few hours later and spray down the surfaces with water.

  • Baking Soda

Also a common kitchen staple, baking soda not only can be used to remove mold. It is also safe to use that you don’t have to worry about side effects on the household members, even the pets. This mineral powder also absorbs moisture and is effective in keeping mold from growing back in the future.

To use: Mix one-quarter of baking soda with water and dissolve in a spray bottle. Spray the moldy surface with the water and baking soda solution. With a sponge or a brush, wipe away the mold. Rinse with water to remove any mold residue that was not initially out. Spray again and let dry.

All these three substances are not just cheap and efficient against mold. They are also safe and non-toxic when compared with other chemical-based commercial cleaning products and come handy in your mission to remove mold.



Read More

Tips to Getting Moisture Under Control in Your Home

Posted by on Jun 21, 2016 in Uncategorized |

moisture in ceilingHaving too much moisture in your house can cause mold growth. When humid air hits a cold surface, the moisture turns into water. Many daily household activities produce moisture, including washing your clothes and dishes, taking a bath or shower, and even cooking.

During winter time, openings without insulation, such as doors, walls, and windows, are susceptible to moisture. Non-insulated pipes can also get moisture in the summer season. Water accumulates on these various surfaces and eventually spreads to other parts of the building, peeling of the paint, and rotting the surfaces, thus creating the perfect environment for mold to grow and thrive.

To control moisture, dry any visible water. Controlling moisture requires not letting surfaces cool down too much, and reducing humidity.

Always keep the vent fan on while showering, and leave it on for up to 30 minutes after showering!

Consider installing storm doors to help surfaces stay warm during the winter season.  You can also get extra thick windows to help with insulation. Besides reducing moisture, these additions help houses to be more energy-efficient all year.

Another way to stay warm is by opening your curtains and blinds in the winter season so that sunlight hits your windows. Insulating water pipes as well get rid of a fresh, natural surface in warmer months. Put sleeves on your pipes to add insulation.

The heating and cooling systems in your house will also help control moisture. Gas or electric furnaces eliminate humid air. Air conditioners lower the moisture level in the air. Make sure your systems have good air flow, and if you run into any problems have them looked at by a professional who can get things back in working order.

Another way to control moisture is by caulking or weather stripping. They will make your home more energy-efficient, as well as keeping humidity away. Use exhaust fans in all the bathrooms and laundry rooms, and ensure that you have an exhaust hood in your kitchen too, as these fans remove moisture from those rooms. Keep the fans clean so that they work correctly and adequately control moisture in your home.

dehumidifierIf you live in an area where it’s not possible to control humidity, you can control moisture by using a dehumidifier. You can use this device in almost any room, including high humidity rooms like laundry rooms, bathrooms, and kitchens. Really any room where the air conditioning doesn’t circulate well.

Dehumidifiers can be your best friend in the summer months down in the Delta or southern states like Mississippi, Arkansas, Louisiana, and Florida. Humidity levels typically shoot through the roof, and that usually brings with it heavier amounts of rainfall. The excessive rain can cause many more moisture issues than we’re usually accustomed to, so being prepared with the tips in this article and having a dehumidifier that is in excellent working condition can save you tons of headaches.

Dehumidifiers are almost non-negotiable must-haves for “snow birds” that leave their homes and condos during the hotter months while they spend time up north. When they leave the doors and windows closed and push up the temperature on their thermostat, moisture levels can nearly triple.

Read More

Symptoms of Toxic Mold Poisoning

Posted by on Jun 10, 2016 in Mold, Uncategorized |

Toxic Green MoldMold gets commonly found in most homes and for the most part, their presence is benign. However, there have been several cases where the toxic variety got found. Hence, the following symptoms should not be ignored as they can cause serious and sometimes even fatal problems…

Sinus Problems
One common symptom indicating exposure to toxic mold or mold poisoning is problems with the sinuses, such as headaches, nasal congestion, or a runny nose. But non-toxic mold can also cause these symptoms, so get it checked as soon as possible.

Dizziness spells
Bouts of dizziness or feelings of light-headedness also indicate that one is suffering from the presence of old in the home. This symptom often accompanies sinus problems mentioned above. When this happens, it means that the toxins from the mold spores are being spread all throughout the body.

Sore throat and coughing
A cough that doesn’t go away even after several days of medications can also be a mold poisoning symptom. As it is, fungi cause throat irritation and chronic coughing, and if these conditions persist, it can be a sign that the mold is toxic, or it’s a case of mold poisoning. Visit your doctor immediately.

Most mold is harmless. However, if you experience any of these symptoms and also have identified the presence of mold in your home, it’s important to get the mold removed immediately.

Sinus Issues from MoldAsthma attacks
While the exact cause of asthma still needs to be pinpointed, exposure to mold for a significant period, especially during one’s early years, has been determined to be one of them. Exhibiting asthma symptoms can indicate the presence of toxic mold in the home.

Hives and skin rashes
Some people experience rashes appearing on their skin upon exposure to toxic mold. This happens due to the skin’s natural reaction to the toxic mold, or another unavoidable mold poisoning symptom. Hives and rashes on the skin should be checked by a doctor immediately.

Unexplained fatigue
If one is feeling lethargic or is tired all the time for no apparent reason, toxic black mold can be the culprit. Even if you have been eating and sleeping well, the toxins in the mood have a detrimental effect on the immune system, leading to one feeling unwell all throughout the day.

Trouble with memory and hearing
Once spores from the toxic mold are in the bloodstream, they can find their way into one’s respiratory system, and when they do it won’t take long before they affect one’s brain. For most people, this is manifested by unexplained memory loss or having trouble with hearing. This too gets considered and another unavoidable mold poisoning symptom.

Blood in the lungs
One of the most severe symptoms of toxic mold poisoning is the presence of blood in the lungs. Once you suffer bleeding in this vital organ, the damage from the gold’s toxins has reached a severe point, and hospitalization is a must.

Don’t wait for these symptoms of mold poisoning to appear. Once you find mold in your home, eliminate their presence immediately as well as the conditions that make it possible for mold to grow.

Read More
scriptsell.neteDataStyle - Best Wordpress Services